Multifunction Terminal MFT-2L.1600
- Suitable for fusing solenoids, alarm indicators, sounders etc, and diode decoupling of power supplies
- Simple OR gate for zone 1 mounting, visible separation for field devices, relay switches
- Bus termination
- Current limiting
- DIN rail mounting
- Maintenance without hot work permit
- Wires can be disconnected during operation once the module has been removed
(parts under voltage remain covered)
Contact Us
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of MFT-2L.1600
| Product Description |
|---|
| Multifunction terminal, 4-pin, 2 x bridges |
| General specifications | ||
|---|---|---|
| Function | The specific device function can be found in the ordering information section. | |
| Electrical specifications | ||
| Resistor | 1 x 1 Ω ... 22 MΩ, 0.5 W 2 x 1 Ω ... 22 MΩ, 0.5 W |
|
| Diode | 1 x I max. 1 A 2 x I max. 0.5 A |
|
| Fuse | 0.032 ... 1.5 A 1.5 ... 6.3 A Pre-arcing time/current characteristic: time-lag T |
|
| Nominal voltage | max. 250 V AC max. 30 V DC | |
| Relay | ||
| Control | 24 V , approx. 5 ... 8.5 mA | |
| Contact loading | AC max. 250 V , max. 1 A DC max. 30 V , max. 1 A |
|
| Contact resistance | 0.1 Ω at 6 V, 1 A | |
| Switching operations NO contact | 3 x 104 | |
| Switching operations NC contact | 1 x 104 | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -55 ... 70 °C (-67 ... 158 °F) |
|
| Mechanical specifications | ||
| Core cross section | 0.5 ... 2.5 mm2 | |
| Degree of protection | IP20 , IP30 when plug-in module is plugged in | |
| Mass | approx. 115 g , depending on model | |
| Dimensions | 93 x 17.5 x 79 mm (l x w x h) | |
| Tightening torque | 0.5 ... 1 Nm | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | PTB 07 ATEX 1004 U | |
| Marking |  II 2 G Ex d e IIC |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-1:2014 , EN 60079-7:2015+A1:2018 | |
| International approvals | ||
| IECEx approval | ||
| IECEx certificate | IECEx BKI 08.0008U | |
| IECEx marking | Ex d e IIC Gb | |
| Marine approval | ||
| DNV GL Marine | TAA0000034 | |
| General information | ||
| Ordering information | Customer-specific values are available in the E96 series. Minimum order quantity 50 pieces. |
|
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210192 |
| ECLASS 12.0 | 27210192 |
| ECLASS 11.0 | 27210192 |
| ECLASS 10.0.1 | 27210190 |
| ECLASS 9.0 | 27210190 |
| ECLASS 8.0 | 27210190 |
| ECLASS 5.1 | 27242692 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 39121008 |
Details: MFT-2L.1600
The multifunction terminal allows maintenance without a hot work permit in a hazardous area.
It employs a 2-step removal process, which guarantees that a potentially formed ignition spark remains inside the flameproof enclosure when lifting off a module and thus makes sure that the ignition spark has extinguished and the module is volt-free.
Datasheet: MFT-2L.1600
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet MFT-2L.1600 | 584 KB | |
| Fiche de données MFT-2L.1600 | 588 KB | |
| Datenblatt MFT-2L.1600 | 587 KB | |
| Datasheet MFT-2L.1600 | 628 KB | |
| Hoja de datos MFT-2L.1600 | 588 KB |
Documents: MFT-2L.1600
| Manuals | File Type | File Size |
|---|---|---|
| Manual | 2766 KB | |
| Handbuch | 2776 KB | |
| Instruction manuals | ||
| Инструкции | 168 KB | |
| Instruction manual / Betriebsanleitung | 329 KB | |
| Návod k poużití | 164 KB | |
| Instruktions manual | 162 KB | |
| Instruction manual | 166 KB | |
| Kasutusjuhend | 158 KB | |
| Käyttöohje | 159 KB | |
| Manuel d'instructions | 165 KB | |
| Betriebsanleitung | 169 KB | |
| Οδηγίες χρήσης | 171 KB | |
| Handleiding | 165 KB | |
| Instruction manual / Betriebsanleitung | 163 KB | |
| Használati útmutató | 163 KB | |
| Manuale di istruzioni | 162 KB | |
| Lietošanas pamācība | 161 KB | |
| Instrukciju vadovas | 163 KB | |
| Instrukcja obsługi | 165 KB | |
| Manual de instruções | 164 KB | |
| Manual de utilizare | 163 KB | |
| Návod na poużitie | 163 KB | |
| Navodila za uporabo | 160 KB | |
| Manual de instrucciones | 165 KB | |
| Manual | 160 KB | |
| Documents | ||
| Functional Safety Manual | 1993 KB | |
| Handbuch funktionale Sicherheit | 2005 KB |
CAD+CAE: MFT-2L.1600
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 2318 KB |
| EPLAN | ||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | EDZ | 41 KB |
| EPLAN macros MFT / EPLAN-Makros MFT | ZIP | 11723 KB |
Approvals+Certificates: MFT-2L.1600
| Certificates | File Type | File Size |
|---|---|---|
| BKI IECEx Certificate of Conformity | LINK | --- |
| Brasil TUV Rheinland Brazil | 1220 KB | |
| Bureau Veritas (Maritime) Marine | 590 KB | |
| DNV Marine | 110 KB | |
| Europe PTB ATEX Category 2 G | 1206 KB | |
| Lloyd's Register Marine | 557 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 358 KB |
Associated Products: MFT-2L.1600
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
| Accessories | ||||||
|
||||||
| Specifications | ||||||
|
||||||
- Ask an Expert
- Cross Reference Request
- Check order status
- News
- NetPartner Login
- Subscribe to Gate-Way, our Process Automation Division e-newsletter
- Service Level Agreements for ecom instruments
- Find a Local Distributor or Representative
- Literature
- Technologies
- Control System Solutions
- Download Technical Documents
- Press Releases
- International Trade Shows
Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America
sales@us.pepperl-fuchs.com
+1 330 425-3555
© 2024 All Rights Reserved. Pepperl+Fuchs does not sell personal data.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified. Pepperl+Fuchs does not sell personal data.